Solicitar presupuesto
+1-647-352-2262 America
sales@ruscana-engineering.com
Máquina del panel de pared «LogHouse 344х26»

LogHouse es el tipo de revestimiento de metal, que imita una apariencia de tronco de madera. Este es uno de los últimos tipos de perfiles de revestimiento de metal, que combina todas las ventajas del revestimiento de metal junto con un aspecto de madera atractivo y presentable. BlockHouse está formado por rollos de acero galvanizado con revestimiento de polímero.

Las ventajas de LogHouse:

  • resistencia a cambios bruscos de temperatura;
  • no inflamabilidad;
  • resistencia a la corrosión, mayor resistencia a la precipitación atmosférica, ambientes ultravioletas y agresivos;
  • bajo coeficiente de expansión térmica;
  • características de alta resistencia, resistencia a influencias mecánicas;
  • posibilidad de fabricación, conveniencia y confiabilidad de la instalación (instalación rápida en cualquier momento del año);
  • cierres ocultos;
  • panel de revestimiento le permite reducir el costo de la calefacción de la casa (sin embargo, el revestimiento respira, ya que no está cerrado herméticamente);
  • apariencia atractiva;
  • la seguridad ambiental.

Como resultado, no obtiene un revestimiento estético y atractivo que puede cambiar la apariencia del edificio.

La empresa «Rusсana Engineering» ofrece para su consideración el panel de pared de la máquina «BlockHouse 344х26».
La máquina del panel de pared «BlockHouse 344х26» es una parte integral de la línea de perfilado.
Esta línea de perfilado de paneles es confiable, conveniente en operación y produce productos finales de alta calidad.

DISTINCTIVE FEATURES

High production speed.

Variety of wall panel types.
For today, there are lots of metal wall panel types.
Company «Ruscana Engineering» is ready to offer you a standard metal panel types and develop and manufacture machine to produce original look wall panel in accordance with your sketch.

Consistent roll forming method.
Consistent roll forming method provides high-quality roll forming of raw materials from different suppliers.
Roll forming starts from the center, gradually spreading over the entire surface of the metal sheet, thereby relieving tension in the metal.
This method allows you roll form raw materials of different quality.

Automatic control system (ACS).
Automatic control system or ACS is based on hardware Omron (Japan) which meets reliable performance. The company «Ruscana Engineering» has developed a very user-friendly interface with various controlled parameters, such as: feeding speed, quantity/length of products, production task and many other. The system is also equipped with alarm and error indicators and support information as well as maintenance service information.

Quality components.
Quality electronic, hydraulic and pneumatic components of the leading industry suppliers: spherical, self-centering bearing units (Askubal, Germany); hydraulic and pneumatic components (Made in Italy); electronic components (Omron, Japan).

The shafts of the rolling mill are made of solid rolled steel and is being heat treated and polished, which makes it possible to achieve a high resistance to deflection and to minimize beating.

Volume hardening of profiling rollers, allows to increase their life in 50 times

Safety.
The rolling mill zone and drive mechanisms are covered with protective covers, which ensures safe working conditions and excludes direct entry of dust, moisture and foreign objects.

Competitive price.

The price of equipment is lower than European and North American manufacturers have for similar equipment.
Warranty and post warranty service.
GENERAL INFORMATION
Raw material requirements
Material

Light-gauge galvanized steel with polymer coating: polyester, plastisol
Zinc coating to range 100…275 g/m²
Yield strength 280…320 N/mm²

Coil thickness 0,45 mm up to 0,6 mm
Coil width 417 mm±2mm
General characteristics
Line operating mode adjustable/automatic
Installed power capacity, no more than 9 kW
Roll forming speed, no more than 20 m/min
Supply voltage at frequency of 50 Hz 380 V
Supply voltage at frequency of 60 Hz 230 V  3 phase
Dimensions (LxWxH),  no more  than 15800х2100х1450mm (receiving table is included)
Weight, no more than 4500 kg
Required operation personnel 1-2 persons
Line configuration
1. Decoiler
2. Preliminary punching module (integrated into roll forming section)
3. Roll forming section
4. Hydraulic guillotine
5. Roller base receiving table ( 4 pcs.)
6. Automatic Control System (ACS)
Configuration: Profile drawing
  • Decoiler
  • Roll-forming section
  • Roller base receiving table, 4 pcs.
  • Automatic control system (ACS)          

Download PDF file

CONSIGUE UNA COTIZACIÓN
  • Máquina del panel de pared «LogHouse 344х26»
  • Máquina del panel de pared «LogHouse 344х26»
  • Máquina del panel de pared «LogHouse 344х26»
  • Máquina del panel de pared «LogHouse 344х26»
  • Máquina del panel de pared «LogHouse 344х26»